Key points of furniture purchase (2)

TogetherToda is a company which has many furnitures such as Chairs,Sofas,Tables and so on.TogetherToda is famous for its high quality goods,so there are some keypoints of furniture selection.

Key points of furniture purchase (2)

Six: Is the edge banding smooth?

If the edge is uneven, it means that the inner material is wet, and the edge will fall off in a few days. The edge banding should also have rounded corners, not straight edges and right angles. The edges sealed with wooden strips are prone to moisture or cracking. For furniture inlaid with plywood, nails are used to nail the strips. Pay attention to whether the nail holes are flat and whether the color of the nail holes is consistent with other places. Usually the nail hole is sealed with putty. Pay attention to whether the putty bulges. Whether the edge banding is smooth is also an important factor to inspect a manufacturer. Small manufacturers with poor quality use manual edge banding. If the board is still being precision sawed, the quality is too poor, and there are gaps in the edge banding of the board. Pay special attention when purchasing.

Seven: Whether the furniture material is reasonable

Different furniture has different surface materials. For example, the legs of tables, chairs, and Cabinets are required to use hard miscellaneous wood, which is relatively strong and can bear weight, while other materials can be used for the internal materials; the thickness of the legs of the Wardrobe is required to reach 2.5 cm. Bending and deformation; cabinets in the kitchen and bathroom cannot be made of fiberboard, but plywood should be used, because the fiberboard will expand and be damaged when it meets water; the Dining Table should be washable. It is found that the wood has insect holes and dust, indicating that the drying is not complete. After checking the surface, open the cabinet door and drawer door to see if the inner material inside is rotten. You can pinch it with your fingernails. If it goes in, it means that the inner material is rotten.

Eight: Is the furniture structure firm?

When selecting small pieces of furniture, such as chairs, stools, hangers, etc., you can drag them on the concrete floor and drop them lightly. The sound is clear and crisp, indicating that the quality is good; Not tight, the structure is not strong. The table can be shaken by hand to see if it is stable. The sofa can be sat on, but if it creaks and shakes when you sit on it, it is nail work and it won't take long. There should be 4 triangular clips on the legs of square tables, strip tables, and chairs to fix them. When choosing, you can turn the tables and chairs upside down to have a look, and you can touch the cloth-covered chairs with your hands.

Nine: The joints of veneer furniture are not strict

Whether it is pasting wood veneer, PVC or pasting pre-painted paper, it is necessary to pay attention to whether the leather is pasted smoothly, whether there are bulges, blisters, and lax seams. Look at the light when checking, otherwise you won't see it. Ash wood veneer veneer furniture is more vulnerable to damage, generally can only be used for two years. For wood veneers, planed veneers are better than rotary cut ones. The way to identify the two is to look at the pattern of the wood. The texture of the sliced veneer is straight and dense, while the pattern of the veneer cut by rotary is curved and sparse. For furniture veneered with particleboard, the ground part must be edge-sealed, otherwise the board will absorb moisture, swell and be damaged. Generally, the corners of veneer furniture are easy to warp. You can dig the corners with your hands when selecting. If you pick them up, it means that there is something wrong with the glue.

Ten: Take a picture of the mirror furniture

Choose furniture with mirrors, such as dressing tables, dressing mirrors, and full-length mirrors. Pay attention to taking a photo to see if the mirror is deformed and discolored. Check whether there is lining paper and backboard at the mercury at the back of the mirror. Qualified, no paper, otherwise the mercury will be worn away.

Eleven: Sit on the sofa and soft bed

When choosing sofas and soft Beds, you should pay attention to the fact that the surface should be flat and not uneven; The selection method is to sit down and press it with your hands. If it is not flat, the spring will not make a sound. If the spring arrangement is unreasonable, the spring will bite the spring and make a sound. Secondly, you should also pay attention to whether there are broken threads or skipped threads in the quilting, and whether the density of the corner teeth is reasonable.

Twelve: The color should be coordinated with the interior decoration

Although the white furniture is beautiful, it tends to turn yellow after a long time, while the black furniture tends to turn gray, so it should not be beautiful at the time. Generally speaking, the imitation mahogany furniture is not easy to change color.