Suspension Bridge Single Arm Surgical Room Furniture

G01 Dry and wet separation suspension bridge

1. Working power supply: AC220V, 50 HZ;

2. The beam length is 2800~3000mm (the actual size is subject to the user measurement);

One lighting lamp;

3, optional configuration brake braking device, the equipment has no drift, the equipment can easily move when released;

4, hanger type dry section tower: 1 (left and right moving distance 500mm). The configuration is as follows:

(1) Instrument platform: 3 layers (adjustable height) optional 550400 * 30mm; 10mm 25mm international standard edge rail enclosure, rounded corner anti-collision design;

(2) Standard configuration of gas terminal: (2 oxygen, 2 suction, 2 air) can be configured according to the hospital

A. The interface has different colors and shapes, with the function of preventing wrong connection; b. plug and pull more than 20,000 times;

C, use secondary seal, with three states (through, break, pull), can be maintained with gas;

(3) Multifunctional power socket: 8,220V

(4) Ground terminals: 2;

(5) Network interface: RJ45 1; telephone interface: 1

(6) 1 lighting lamp;

(7) 1 drawer;

(8) 1 stainless steel adjustable infusion rod frame;

(9) 1 stainless steel adjustable injection pump rack

(10) Rotary: 0~340;

(11) The net load weight of the dry section tower is 80kg;

(12) All gas terminals, power interfaces and weak current interfaces are placed on the terminal box, electricity and gas separation,

Power power and gas source are installed on the aluminum alloy column of the tower body.

5, hanging column type wet section tower: 1 (left and right moving distance of 500mm). The configuration is as follows:

(1) Standard configuration of gas terminal: (2 oxygen, 2 suction, 2 air) can be configured according to the hospital

A. With the function of preventing error connection; b. More than 20,000 times;

C, use secondary seal, with three states (through, break, pull), can be maintained with gas;

(2) Multifunctional power socket: 8,220V;

(3) Two grounding terminals;

(4) 1 stainless steel adjustable infusion rod frame;

(5) 1 stainless steel adjustable injection pump rack

(6) 1 storage basket;

(7) Rotary: 0~340;

(8) The power interface is on both sides of the tower body, and the gas source is distributed at the back of the tower body, fully realizing the separation of electricity and gas to ensure the safety of the equipment

6, the main material adopts high strength aluminum alloy profile;

7, the surface treatment using electrostatic spraying.